Welcome to the Corvette Forums at the Corvette Action Center!

Transmission drain plug

skybolt31

Member
Joined
Apr 2, 2007
Messages
6
Location
Massachusetts
Has anyone added a drain plug to the transmission pan? I am contemplating adding a drain plug or using a different pan with a plug, any experience with these options?
 
I think there are add on plugs available. If memory serves me right I installed one a number of yrs ago. I think it was set up with a nut on the inside to hold the body that the plug screwed into. If I were to do it again I would weld one in.

Glenn
:w
 
I've seen after market pans with drain plugs.

I have also seen people drill a hole and weld a nut to the inside of the pan.

Good Luck!
 
Most parts stores carry the kits. I installed mine in the lower back of the pan so I wouldn't lose any ground clearance. Makes fluid changes much easier.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom