Welcome to the Corvette Forums at the Corvette Action Center!

Vert Flex

Gorgon

Well-known member
Joined
Jul 15, 2002
Messages
1,040
Location
Philadelphia, PA
Corvette
None
I recently had some work done on my 95 vert where the cross-brace under the car needed to be removed. Is there a specified way to reinstall the cross-brace to optimize stiffening? I seem to have more body flex than before I had the work done. Of course it could just be more noticable after all the seat time in the FRC. ;)

Leon
 
6speeder said:
You might check to confirm the brace was re-installed.......:Silly

Yeah, it's there. I've been under the car since it was worked on. I'm going to retorque the bolts to see if it helps.

Leon
 
Make sure the car is on as flat a surface as you can find when you re-torque the brace. Then let us know if it makes any difference.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom