What options do I have?

[markone]

Hi folks:

Ok, I do not have the original window sticker for my car, nor any of the original dealer paperwork and the original owner doesn't want to be contacted. Does anyone know how, where I can find out what un-obvious options are on the car, like rear-end ratio and low tire pressure sensor? Websites, somewhere on the car, etc?

thanks,

markone

 

[NevadaJim]

You can order a reproduction of your window sticker and build sheet from the National Corvette Museum -- here's the link:

https://www.corvettemuseum.com/library-archives/build_sheets/index.shtml

Hope this helps.

 

[Moonunit 451]

Should be a spec sheet either inside the glovebox on the door or on the door (lid) in the storage comp. behind the Dr. seat that will give you the codes which you can cross check here in the info center.

 

[GeorgeT]

Got to the following site:

https://www.corvettemuseum.com/library-archives/build_sheets/index.shtml

It is where you can order both the build sheet and window sticker for your vette.

 

[GeorgeT]

Go to the following site:

https://www.corvettemuseum.com/library-archives/build_sheets/index.shtml

You can order both the build sheet and window sticker for your car.

 

[c4cruiser]

The 1992 RPO codes will be on a white sticker located on the underside of the center console lid. Unfortunately, if a previous ownder has replaced the lid, it would be gone. Pulling the sticker usually results in the characters being ruined by the adhesive that pulls off.

If the sticker is still there, go here:
http://www.corvetteactioncenter.com/tech/rpo/8496rpo.html You can decode the codes from this page.