Window regulator teeth repair

[2BLACKZS]

Greetings all.

New to the forum, recently purchased my first Vette, a 75 C3 coupe. Let the fun begin, starting with the window regulators. The teeth on the original regulator gears are worn badly. Considering the stainless steel regulator gear repair kit sold by Mid America Motorworks. Anyone have any previous experience with this kit? Feedback and suggestions are appreciated.

Thanks!

 

[bossvette]

I did my drivers side last year with a simular kit worked fine.
Welcome to CAC enjoy

 

[craig32]

Same here, mine came from Ecklers with NO directions. Took 3 tries to get it right, but it gives one a sense of accomplishment to finish it. Just take your time and be careful, there's a lotta sharp edges to tear up your flesh. It is a good place to start, it's both difficult and simple, and will expand your vocabulary :gap
Good luck, we're here if you need us!
Craig

 

[bossvette]

I took pictures as I dissasembled it, mine had instructions though

 

[2BLACKZS]

Thanks all for the feedback!