Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have been fighting a defrost duct that appears to be too short to reach the dash vent. Does anyone know if there is some connector I am missing or am I supposed to build a duct?:confused
That is what i thought. As you can see by my screen name this wont be a problem to fabricate something. I am going to try several size flex dusts and make a sleeve if i have to. If it works out well I will make 2 and give you one.
do you have an AIM??? (Assembly Instruction Manual)
It sounds like something has moved or has been moved...
was the dash ever apart or has it had work done behind the dash?????
It was never designed to be connected to the defroster duct. Standard GM design practice was to leave a gap between the heater box defrost outlet and the defroster duct on the dash panel, to isolate the dash from the noise and vibration of the blower; if they're solidly connected, the dash panel becomes a "drumhead" that amplifies the noise and vibration from the heater case.