Recent content by Drwhitesr

The lights do go out. It worked great until I installed the LED bulbs

My key is not in the ignition.

1980 C3 Corvette I replace the 194 lights bulbs in the dash and center console with LED bulbs. Now when I turn my lights off the buzzer on the lights stays on. If I pull & push the headlight switch off and on a few times the beeper will go off. I think it may have something to due with the...

When I connect my load tester to the battery the meter shows 12.9 volts. After load test the battery shows 12.4 volts. 6 month old Interstate Battery.

I installed a new PowerMaster reduction gear starter on my 1980 Vette. The powermaster replaced the original starter. When the engine was at operating temperature the original starter would labor to turn over the engine. The now that the installation is complete the new starter only clicks and...

Would anyone have a Body Shop in the Orlando Florida area that hey would recommended? I need to have some minor paint work done on my 1980 Vette. I bumped the nose on a cabinet in my garage and wrinkled the paint on the nose of the front bumper. Thanks for any information you can provide.

Thanks for the information. Very helpful.

Two Questions 1). Would anyone be able to explain how the theft deterrent system is armed and disarmed? 2). Is there a procedure to test the system to determine if the system is working correctly, or at all. Thanks for any help you can provide. My car is a 1980 C3

For the information that is standard on all 1980 C3 such as axle weights and gross vehicle weight rating, I found a like car and got the information off of the tags on that car. For the information specific to my car, I was able to find things like build month and year on line.

I just received the new labels from Zip Corvette. They are and exact reproduction of the original. If you need new labels, these are great replacements.

I have found a company that is licensed by GM to reproduce both tags, I am just trying to find the information that should be on the labels. I think I will have to find a 1980 C3 that has the same size tires and that still has the labels on the doors. Thanks to everyone for the feedback.

Thanks for the feedback. The metal tag that should be on the door is also not there. Replacing the two stickers are step one and then replacing the metal tag will be step two. Again, thanks for the feedback.

I am trying to replace the Vehicle Certification Label as well as the Tire Information Sticker that belongs on the rear upper portion of the drivers door. I am trying to confirm the following information. GVWR (Gross Vehicle Weight rating). GAWR Front (Gross Axle Weight Rating Front) GAWR...

The cover will be used when the car is parked in the garage not outside.