Recent content by Kenny

Mud wins:happyanim:

Thanks for the input folks Checked code has a 28 speed sensor signal Tire diameter is 25 on front and 26 on rear Yup speedo is about 2MPH off when checked with GPS Didn't change for handling. Needed tires and liked the wheels

If I find a tape measure I'll get the diameters (won't be home till Sat. eve) What do I need to do to get fault codes.( factory repair manuals at home) Searched the site and found out how to get the codes. Now all I need is a paper clip. (my kingdom for a paper clip) lol Thanks for the...

I had 285/40 17's on all 4 corners. I replaced the wheels and now have 255/45 17 on the front and 285/40 18 on the rear. After driving a while both lights come on. I am guessing it's because of the staggered wheel size and the wheel speed sensor signals being different. Is there some setting...

The bushings are also available at most auto parts stores in the HELP area as ford power window bushings

welcome I also had a HD. I traded it for my 93 ( torch red ). It had over 150k on it and no records. After I got it (on a thrs) I changed the top and bottom rad hoses and the belt (on fri) hit the road for a 600 mile wknd road trip. I wouldnt worry much about it. Go for it and enjoy :D :v

On my 93 I had found coolant on the crossmember. The w/p rear seal and most of the bearing balls were gone but it was working fine with no noise and only a slight drip. Opti was still ok but I replaced because I was already in that deep and it was probably the original with 155k miles. I still...

Good advice. I can only add is look for a reason NOT to buy. Like being used as a dog house. There is always a reason to buy: I like the color. It's the year I want. It's a stick/automatic. etc. Good looking car:)

I read that too. Also stated that with the more advanced oil monitoring 10,000 mile oil changes will be possible negating the increased price.

Welcome to the forum. You'll find a wealth if information here. Enjoy that C4

:w Welcome to CAC Good bunch of folks here Ken How about some pictures

:w Welcome to CAC how about some pictures Ken

Look carefully it is ZP(for pickup)1

When I was at funfest I asked Chris Petris (he was presenting several forums on maintainance) about this as mine is locked up. I was told that the pump only operates for the first 2 min. only at engine start up and then is turns off. This was to reduce start up emmissions and get the o2 sensors...

Mike please dont take any offense but I have been with Advance Auto 16 yrs and I am also ASE certified. Advance probably has the most ASE certified employees of any parts store out there. They place a high priority on ASE testing but still the knowledgeable parts guy is getting harder to find...