Recent content by redc4corvette

LT4 Heads $3500.000 for the AFR 220 heads and T&D Shaft rockers. Total 2 hours running time on heads.These are the C&C ported intake and exaust race ready version#1127 AFR. LT4 intake brand new in factory box $550.00 Call John or PM 1-800-959-7319 HST 9 to 6 7 day's a week. Thanks!

Thanks Tom I ordered the $106.00 kit yesterday.

Is the float moving up and down free,and not catching on the hose clamp you installed on the hose for the pump? Check the ground wires. Check to see if you broke the clips that hold the half moon cover on the float. You don't want to screw up that sending unit .You won't believe the coast of...

I have the 94 with tourch red outside and red and black interior inside. That would be great if you have the code numbers. How much to give them up:)

Exelent information ,I will be buying mine this week THANKS!!

Start with the basics. Fuel presure. Compression. Gas tank full. Oil in the engine. Coolent level. Is it overheating?

I though you were looking for a hood for your 94 86 and up will fit. I got an 85 shipped to me for my 86 and the sides stuck out too far and the head light buckets would not fit.

Looks good!

I am going to try to take some pics fro another thread on the other form he is doing the same thing. I did cut up my fuel lines .I made a dession to not save the front fuel lines and cut them off under the a/c box .I don't have an a/c box anymore the last nitrous explosen took care of that.I...

84 -85 will not fit your car correctly,you want 86 to 96 or 97 . Toledo hoods in ohio has them or vet2vet.

I think on your 383 you might need a little more carb. I would think a holley 850 vaccum secondaries and #81 jets in the primaries should work out just fine. You will need to go to jegs and purchase one of their throttle brackets and don't forget the holder for the trans cable if you have an...

It will give you cut nuckles, coolent maybe on the opti and no gain what so ever. Not to mention a possiability of cracking a heater hose or breaking the brass raidator connector.

The original ones are selling for gold. I sold a set of 86 valve covers 2 mths ago with the emblem in perferct shape for $10.00,the buyer sent me $25.00 bucks and I thought he was being nice,but he new what he had.

It's 88 mph I had to hammer you squid.All in fun.

I didn't remove anything but my valve covers and spark plugs . Long air hose ,5/8 plug socket with 3/4 open end wrench. I used a Snap-on 5/8 swivle socket and a 45 degree long handeled 3/8 ratchet.