Unfortunately I've tackled a few of these repairs on different vehicles having to remove the HVAC box attached to the firewall. I know they're not for the faint of heart.:ugh It seems GM and many other manufacturers must believe their suppliers based on the lowest bids don't believe their parts...
I know this thread is several months old. So, if you haven't looked at this yet, you might want to consider doing it? I'm in the process of working on a recently purchased 93 Corvette myself. To make sure I didn't break down to some unknown problem, I started checking the typical things that...
A recently purchased 93 Corvette has a few issues I've been trying to resolve. One issue is when turning the heat on, I've noticed cold air blowing. I've also noticed the AC compressor is running. I did disconnect the compressor to see if this was the case where the AC was over-riding the demand...
I want to thank everyone who helped me! Here's the story of how the problem came about. And what I did to get the power locks working.
Upon closer examination I noticed the passenger door panel has been on and off numerous times as has the connector for the power locks and window...
Today while working on the passenger door mechanism, I lost total power door lock operation on both sides. I've checked the 20 amp power door lock fuse, switch, and wiring. I am at a loss because I can't find anything on which pin coming off of the door lock switch in the 12 volt supply, lock...
I'm working on a 1993 40th Anniversary edition which I just brought home yesterday. The power door locks actuators were working on both sides until today. The first thing I checked was the 20 amp fuse for the door locks. That was good! I then removed the door panel on the passenger side to check...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.