Recent content by Steve40th

Actually turned out to be left side bend in exhaust was touching body. So, OEM exhaust got bent somewhere during its life being taken on and off.

Those ZF DOc plates are very good. Make sure you check torque after a few weeks.. Other than that, they are solid ..

Code 15 is Coolant temp sensor in the front of the water pump. Your digital cluster may read only 142 coolant temp.. But 15, which I just did 2 days ago on my 93 is this. I have used several different ones over the years, the OEM is shorter and the resistance is always spot on. There is a chart...

93 C4, Okay, at 2500 rpm and at 4500 rpm I have a vibration under medium to heavy throttle. Does not matter if AC is on or not. In neutral, or park, the problem is not there. Had main drive shaft checked. Good, and balanced. Half Shafts have zero movement, and as driveshaft, has spicer u joints...

Hey, Havent bought tires in a very long time, 11 years. Vette was in Hawaii, and rarely was driven. Have GFG KD 275 front 315 rears right now. They were great tires back then. Hard as a rock now. I need tires, dry summer only. I rarely see rain in this car now that I am back on the mainland...