Search results

I vote for a beater save the vette!

I used this article to change my 92 opti to the vented version it works well 1 1/2 yrs now. Instead of modifying my new opti I purchased a 95/96 cap kit and used it they are interchangable.

Unless I feel it hunting I leave it in od!

I replaced my opti on my 92, It was backfiring and spark knocking, The job is not too bad you have to remove the damper pully and the water pump I replaced pump also. And plug wires while everything was open. I had about 500.00 in parts and a saturday. Hope this helps.

I just put michelin pilots on mine real happy so far!

shocks I just replaced mine with original bilstiens 70.00 ea at TLD,just my .02.

I bought a 92 but I would reccommend a 96 better all around car!

My 92 did this I replaced the Iac motor(valve) in the throttle body and that fixed mine. you might try cleaning it mine was black from carbon. If you do replace it you have to reset it turn key on (do not start) for 5 secs off for ten secs and it is done. You will need a 1 1/4 in socket to...

a/c I also have a 92 when my comp went out they said it was r12 but when they started the work they it was really 134 gm tech line said they changed mid year maybe you will be lucky. beer

I have one of those shades from MAD they have plastic tabs that fit between the weather stripping not suction cups like the catalogue says hope this helps.

opti spark It is usually better to just replace the entire unit. You can get one for 350.00 at the last detail corvette parts in georgia.They have an on line catalogue www.tld-corvette.com.I have had real good luck with these guys. You might want to consider venting also.I went that way a...

reply Thanks rob I checked it out good info.

I am going to replace my distributer and my manual says to mark shaft at top, but it does not say how to line up and install new one. Any help would be welcomed.

venting the kit is a small vacuum hose from optispark dist. vent hole to a one way check valve and moisture filter which as the car is running sucks out and traps any moisture and does not drain vacuum system while shut off.

1992 start problem I had this problem also I added the positive venting kit available in most of the catalogs I got mine from corvette central on line,it is tricky to install a lift is required and be able to work in some real tight places while looking in a mirror to locate the vent holes.you...