Search results

Do you think that a $10 sensors does this all on its own? It sounds good from a sales and marketing standpoint. Besides we are talking about a 1995 model.

1990 has drivers bag only.

Not sure but could be. My point is that it is not some cool sensor that knows if the oil needs changing. It is actually all the sensors that give the computer the info. I did this from memory but if you need more info I will get the books out. First thing is the bulb good. I had a guy with a...

The computer monitors water temp,oil temp, oil preasure and mileage to determine when the light comes on there is no sensor. I am not sure but I think it is the ECM computer.

The Mobil 1 is full synthetic and theoretically can be run forever. I know alot of people that will change the filter at 3000 and add 1qt of oil. Then they do a full change at 6000. Now all of this depends on driving style, condition of the motor, how often you drive or how long it sits. It is...

Thanks

I have seen many times just the outside bolts or bolt leaking. Has nothing to do with the head gasket. It was most likely even torqued correctly. I have seen people not use sealer on the outside bolts thinking it wasnt important. It sounds like you put the heads on yourself if so you know if you...

The recomended thread sealant is teflon paste. Loctite makes it. Also moly lube under the head, if it has aluminum heads washers are required. Use the correct torque do not add to it it will only stress the fastener and the threads in the block. The teflon will seal the threads even if it is wet.

I have a burner and a cable with the software but no clue were to start. The 1-4 shift is a simple toggle function when you burn the new chip.

Have you tried your spare key? It could be the resistor. I had one go bad a year ago. You can bypass it by adding a resistor under the dash not sure on wire color. Do you have an add on remote start if so they bypass the vats to get them to work and allot of them go sour down the road. If you go...

Yes the motor is stock. This is my daily driver so just looking for a little more. Also want to turn off the coggs system. I have it kinda unhooked but the light still comes on, 1-4 shift.

Performance chips what do you recomend for a 1990 l98 6 speed

I actually run win ALDL on my lap top at the same time I am running C.A.T.S. tunining software with a romulator. I can read the info and tune at the same time. I doubt you will find 1 program that does both. If you do make sure to post it. I would recomend you find a helper to drive or run the...

There is no seal on the oil dipstick. It is press fit and you can use a sealer on it. I would suggest first trying to clean it with brake cleaner and let it dry and apply a good silicone around it. Make sure you rub it on not just squirt it on. If it is a lose fit you may want to replace the...

What an excelent hack job just plain a thing of beauty did they use tape or just like the pic. I did a little test today to kinda match the hack job. I wired the 3 leads all dirsct to 12 volts possitive and grounded correctly. (not on a Vette of course) the alternator of course charged correctly...

OK time for my beating. How does everybody think my radio install came out. I know its not stock but I was tired of singing to myself. Galen

Radio Open

Radio Closed

Check e-bay for parts. Sorry I just dug all my bose (junk) out and sold it on e-bay. The parts to repair mine were just to high needed 1 front amp and one rear. That was more money than I could justify. Regular speakers will not work it is very low input like from a preamp into the speakers. I...