Search results

Exactly! This is just what I heard from a GM guy, but GM is betting that the Corvette won't do as well as C5 did. Lets face it the C5 introduction will be hard to top! If the sales aren't there, theres speculation that the Vette will be canceled! Perhaps for a complete REDO like the T-Bird...

Well Ive been reading all the posts. Looks like everyone is in incredible anticipation and arguments both ways are starting to boil over a little....Kinda entertaining mind you at the end of the day were all buddys LOL Anyways... I have heard from a source out of GM that the short run of the...

Have you ruled out or checked your distributor? I get ALOT of GM's in the shop with the identical problem and it turns out the after HOURS of testing piece after piece the distributor magnet is cracked and the cylinders basicly fire at will. At High throttle it clears up but at idle Whoa look...

Dude you are aware theres actually TWO sets of brakes on the rear of this car right? Fixing the one you "see" ain't gonna do squat for your E-Brake. Pull everything apart rotors off and you'll see what Im talking about. Theres adjustment in that piece. Also your probably going to have to...

Thats funny, we sell Fram, Defense, Purolater One, and PowerFlo. I just grab which ever works at the time I never really thought about or kew the difference. I know the Fram is Allied Signal and so it the Defense (Probably the same filter) But the Powerflo and Purolator seem to be a much...

EGR Might do this to no? Has this car actually been scanned?

Thing I hate about Dex cool is, if it loses its water throughout running the vehicle it turns into a nasty gel brown crap substance that actually eats out your plumbing. GM actually warns about this and if you "neglect" your cooling system and take back the vehicle with chewed out parts...

Are you leaking anywhere?? Im mean have you actually been able to get under the car and take a look at things? You said you PCV was exhanged (assuming the old one was shot) perhaps it pressured up your seals therefore the leak. Try looking behind the bellhousing dust cover for a rear seal leak...

With the loss in back pressure your O2 sensors are going to scream lean therefore your going to lose a bit of fuel mileage due to the computer riching up the mixture. I think TPiS sells a "cheater" for C5's all they do is clip onto the existing 02 sensors and fool them into thinking everythings...

Vig you don't have any massive leaks or PCV problems do you? Other than that sounds like oil pump to me.

Was this battery stored in sub zero conditions? If it was most likely it froze and now dead... Try trickle charging it and if that doesn't work start shopping

No you don't have to remove the knob to get to the switch. However I thought I read that it was loose? Plus its nice to do anyway to clean it etc.. Plus it make this job easier as the boot won't be in your way while working on the switch/wires. This is also a good time to take a look at your...

Check your battery connections (Hey who knows) Clean them up and ensure a good connection. Now If you have a Voltmeter start the car and look for 13.5-14.5 volts. If no Bad alternator. (Just hook the voltmeter up the the batter poles) With the car off look for around 12 volts. Do you have a...

Looks to be fine? Please describe? How did you check the wheel bearing? It IS VERY possible the bearing is bad without ANY play in the bearing. The only way you could truely know is putting the car on a hoist and accelerating. Then using a screwdriver or other listening device, listen for a...

As for your OD Mine died as well.....Heres one of the GM mistakes. To that inline switch I was telling you about is two black wires....Heat them up Im betting theres no wires in there because they broke! This is what I did with mine. I used Pheonix Gold speaker wire LOL (Hey its good stuff)...

Stick your fingers or a small tool in the button and pry it up hinging towards the back. Pull it off. There will be a "T" bar (The actual button) and a plastic "tray". Unscrew the "T" bar ---> it has EXTREME fine threads so this will take awhile. Remove the plastic tray Now you'll see a...

Exactamondo. When reoiling these filters just spray until the white cloth turn purple.....hence the reason for the purple dye. When it turns purple STOP. People ALWAYS just keep spraying like they are trying to paint the darn thing and it ends up soaking wet in K&N juice. Therefore it coats the...

Dynomax here, they have BEAUTIFUL tone but Im changing the tail pipes to chrome folded ovals Vs the ZR-1 looking ones they supplied.

Edit... I take it back I just had a second look.... AGH!!!! :r :puke :puke :puke :puke

As for the wood dash...a little to far and crappy color tone (IMHO) Paint Job? Ehhh ok can live with it....Fading Flags.. Now the nose and the mid body ground effects NICE. I really like them. As for the Bum, Motor, "Corvette", steering wheel, audio location, and the Wheels? :SLAP