Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. G

    Wanted Injectors-1990

    Hi Craig I just checked my injectors and they are grey top/aluminum base..the ones you have I think are the 19 lbs found on earlier years. Unfortunately they are not suitable. Thanks for checking Gary
  2. G

    Wanted Injectors-1990

    Sounds like a square deal to me. I assume that by a set we mean 8. The problem that I am having is that the resistance on one injector in my 90 is low (5 ohms) ....should be about 16 ohms. If its not too much trouble perhaps you check the ohms on the injectors you have...if you don't have an ohm...
  3. G

    Wanted Injectors-1990

    Hi Bossvette I''m interested in purchasing the injectors. My injectors are grey. If yours are from an 89 to 91 they should be ok. The injector may have a stamped number 5235436. Cost/shipping??? Thanks gmboileau(Gary)
  4. G

    Wanted Injectors-1990

    Looking for used or NOS Multec/Rochester 22lbs injectors Delco Part Number 217-292. These are the OEM from 1989 to 1991 on L98. Thanks Gary
  5. G

    Injectors/Code 45

    Hi Glenn The problem you describe is very similar to mine....did you replace all the injectors or just the faulty ones? Stock or after market? Did you get you get the others cleaned? Cheers Gary
  6. G

    Injectors/Code 45

    I have read with great interest about the various problems with Multec fuel injectors and have discovered that this most likely the cause of the Code 45-rich exhaust on my 90 L98. I measured the resistance of the injector on cyl 4 and it was about 5 ohms the rest were about 16 ohms. I used a...
Back
Top Bottom