Search results

I just bought an 03 C5Z. It seems like the biggest deal to check on or worry about is the steering column lock. If it's original and fails, you're stuck where you are. Even with the recall, you can still have a problem: the column won't lock again but if the system fails, the fuel get cut off...

I have a tear in the side bolster of the driver's seat back. Anybody have one laying around they'd like to part with? Must be black and Z06 logo. PM me. Thanks, John 03 C5Z

LTPWS Light You can remove the bulb, or if you plan to reinstall the sensors, I think you can pull the fuse for the cruise control. JCS44

Code scanner You can a basic scanner on Ebay for about $20. All you'll ever need. JCS44

Jake, I have a code reader and the only thing I get when the SES come on is 0300, random misfire. This is pretty non-specific as to the cause. John

Well, this car will run up to the redline with no problem. The SES light usually comes on at about 2000 rpm just cruising along in 5th. Battery is fairly new and reads 14.1V. JCS44

I could use some help with ideas why my SES light keeps coming on. The car received a new water pump and distributor cap/rotor, and new plugs about a year ago. The car has 40K on it and is stock. Ever since, the SES light will come on, usually after the car has sat for a few days. The light...

There have been a number of threads over time about what the "real" hp and torque is for the LT4 motor. We all believe 330hp and 340lbft is low. I've noticed that you can buy an LT4 crate motor from GM and they advertise that one at 375hp and 396lbft so this ought to be a strong clue. The...

You can remove the light bulb from the info center and still keep the cruise. JCS44 96 LT4 vert

I'll give it another shot. The thing is, this battery is only about a year old. Thanks

I accidently left a door slightly ajar for about a week and naturally it drained down. I put a charger on it and it seemed to bring it back up OK, but I didn't start it at that time. Now, after sitting for a couplke of days, it will not start, The interior lights don't even come on. What to...

I certainly hear what you're saying, but this thing is so intermittant that it goes away almost as fast as it happens. Will the scanner still see it?

What do you mean by "Tech 2 data"?

This morning the Check Engine light came on in my 96 LT4. While it was still running, I plugged in my code reader and got a 303. A little later, after shutting it off, plugging in the reader, and restarting it, I got 300. I've had this going on for a while, but its always been 300 (random...

Pull the Service LTPWS bulb.

I got the code reader from ebay. As luck would have it, the light was on this morning. It reads 0300 which is random/multiple cylinder misfire detected. OK, now what to look for? Thanks, JCS44

I'm going for it on ebay. Thanks. Are all of these about the same? Many Thanks!

Good idea on the code reader. By the way, the light went off on the way home. Oh well.

In the past, I've taken it to a Vette Shop several hours after the flashing light has gone steady. I've done this 2-3 times and by the time I get there, there's no code. I'll try the Autozone idea as I drive right by one on the way to work. This has always happened first thing in the morning...

Don't think so as it's very intermittant. Has not done it for about a month until today, and if it follows the usual pattern, it will be off tomorrow.