Well its taken 14 years to finally finish this project and I can well say Im over it
It has been a long and expensive journey, some of you have followed my postings and Im very happy to say its over and very pleased with the outcome.
Its time for cruising and enjoying my hard work
Here are...
I have always read Al Knocks interiors were the best but I live in Australia and when my $4000 interior package arrived I was so unhappy with the leather colour all blotchy , they offered me a $300 credit even before it arrived here I knew it was fu--ed did not want a credit I wanted a good...
fine59
Yes the colour is Crown Saphire had it matched to original colour chips only two colours that were the same were Ford America and Renault
Glad you like it cant wait to polish it will send picks when done
It looks great straight out of the booth but
Well started assembly due to the bad weather here in OZ cant work outside good reason to stay in the garage.
Had a few issues with door and window mechanism assembly but manage to work it out I have a few bits and pieces missing since my car was not complete when purchased 12 years ago but lots...
Hi all
Im having a few issues on the assembly of the window assembly on my 59 Corvette has anyone any photos of the inside of the doors so I can see which way things face inside,:ugh
Many Thanks Jose
Well waited a long time for this started 12 years ago finaly painted and ready for assembly .
Crown saphire in colour Snow crest white in the cove (looks a bit yellow but its only the fluro lights):beer
tail light
The problem is I live in Australia and sending anything back can be an expensive and time consuming effort that is why Im trying to get it correct the first time I would hate to be dissapointed with quality and fit.
Thanks Jose
Hi all
Im thinking of buying a new pair of after market tail lights to suit my 59 Vette but am concerned of quality and fitting has anyone had experience with this issue and can recommend a brand or supplier for lights.
Thanks Jose:ugh
hood cable location
Thanks Tom
The hole on the master cylinder I have now used for both cable cos the one you have behind the throttle lever dose not exists
on my car , they seem to sit nice where they are.
I want to thank you very much for your efforts in helping me locate these cables, great...
hood cable location
Hi Tom
The hood cables go from the cabin through the fire wall (as we call it here in Australia), and enter the engine bay to present themselves to the catches on either side of the engine bay.
I cant seem to find the holes on the fire wall to put the cables through.
Thanks...
For those who have followed this build here are some updated pics of FINE59
I have driven it around the block a couple of times the first time in 12 years this has been a long and expensive project but soon will be completed.
I had a few issues with the clutch to find out with research that the...
FINE59 hood release cable placement
Hi
Can anyone help me with the hood release cables Im not sure where in the fire wall do the cables go to enter the engine bay . I dont seem to see any holes low enough on the fire wall so the cable can present itself properly with the hood female catch,
I...
Hi
Im looking to purchase a pair of rear tail lamps for my 59 but am concerned about quality and fit
does anyone have a brand or company i should deal with to get the best on the market.
Thanks Jose
fine 59 sealer
Remember that is a 2 pack top coat solid colour for any production car this will need sanding first with 600 grit then finer for the 2 coats of colour and 3 coats of clear followed with a cut and polish to flatten off the paint should look great.
there is already a little...
fine 59 grey base coat and engine bay
The body has been coated with 2 pack, grey in colour to seal the undercoat and to reduce shrinkage when the top coat gets sprayed, the engine bay is finished in Satin black and now I will put all the running gear in and fire the motor up before it goes...
fine 59
[Thanks for that Roger you cant imagine how long its taken me to get info on such simple things and no one seem to be able to help till now.The windscreen wiper vac bottle bolts to one of the splash shields do you remember if the water bottle was bolted to the wheel arch on the flat...
fine 59 first paint
Hi tom
This weekend the body is receiving a couple of coats of 2 pack grey in colour just to seal the undercoat and reduce shrinkage, the engine bay will be in satin black ,:)
This will give me time to put my running gear in and fire the thing up before its painted the...
Does anyone have a picture of their engine bay to see location of windscreen wipper bottle and vac bottle and other items in the engine bay of a 59 Vette.
I have replaced my inner wheel archers and there are no holes to locate my regulator and all other items in the bay
Can any one help:eyerole
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.