Search results

I purchased a carburetor from guaranteed carburetors 10 years ago and could never get it to work properly. I sent mine in for the core which was a very bad mistake. The carburetor they sent me was from a 1984 gmc truck. When I disassembled it recently the rich mixture stop screw was screwed...

I purchased a R12a Kit on Amazon for $75.95 and wow. It works great and it is alot cheaper and less paintful than switching everything over to R134a.:happyanim:

Interior done now ,,

finished ,,,

fixed it My problem was bubba had installed a earlier model (up to 79) vacuum shutoff switch on the heater box. 80, 81, 82 switch is different. I called Dino Behler and he pulled me one. $25.00 shipped to me. If you can't find a part. Corvette Salvage | Used Corvette Parts C3 C4 C5 C6

This brown/white wire is shorting out my radio. I have unplugged it temporarily. It's plugged in above the radio fuse and i'm having a hard time tracking it. :confused

no reply since 08 ? I'm working on that issue right now. Did you ever get yours working properly?

Another problem to be fixed ,,, Number 1 body mount on the drivers side was rusting out. I cleaned all the rust out and welded a shim to the top, then drilled out the hole to fit the bushing. When I install the shims on thi one I think i'll leave one out.

update ,,

More Pics......... ,,,,,

The body mount bolts all came out like clock work except for this one. I thought I let the WD40 soak long enough. ,, That was rough, think i'll sit right here.......:hb........and drink a Beer.

Dupli-Color Dupli-Color Engine Enamel, (Ceramic) 500 Heat Dyno Tested DE 1608 GM Blue If you clean it good with (Acetone) it will adhere very well. :thumb

Working on the interior now ,,,,

getting there ,,,,

Georgia L81 Restoration from St. LouisIt was all original and in good shape. I puchased the car off E-bay motors and it took me two winters to restore the underside, but all it needs now is carpet, seatcovers and a paint job. Original rebuilt engine 9.0:1 compression, three angle valve job, fly...

Working on the Interior now ,,,,,

When I restored the engine compartment I saw these numbers on the passenger side. I think this is a inspection card from the factory. Now I'm restoring the interior and I found the same numbers again on the passenger side.

75% done. Working on interior now. ,

All 2 wheel drive 700R4's measure 30-3/4" in total length. This article is the one I got all my info from. Great article. Their transmissions are way to expensive. 700 Raptor 700R4 700R4 Transmission 700r4 700R4 700r4 PATC 700R4 700r4 700r4 700r4 700r4 700r4 700r4 700r4 700r4 I did have to...

I'm sorry. To answer your question, A 1982 driveshaft would probably work if you were puchasing a rebuilt 700R from a 82 Corvette, which is hard to find. If your buying from Bowtie, I would let them specify it.