Welcome to the Corvette Forums at the Corvette Action Center!

Help! Body Mounts O.M.G !!!!!!

Yellow81vette

Active member
Joined
Mar 21, 2010
Messages
39
Location
Georgia
Corvette
Yellow L81
The body mount bolts all came out like clock work except for this one. I thought I let the WD40 soak long enough.



DSCF7659.jpg,DSCF7661.jpg,
That was rough, think i'll sit right here.......:hb........and drink a Beer.
 
I'm wondering why you took it apart? Looks like a freshly restored car to me.

Also- WD40 is not a good rust penetrant at all, not much better than water. There's much better products on the market.
 
Another problem to be fixed

DSCF7719.jpg,DSCF7725.jpg,DSCF7752.jpg,DSCF7757.jpg
Number 1 body mount on the drivers side was rusting out. I cleaned all the rust out and welded a shim to the top, then drilled out the hole to fit the bushing. When I install the shims on thi one I think i'll leave one out.
 
very nice!!!!!:thumb:thumb
 
Good job, but they looked pretty good to begin with! :happyanim:
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom