1.6 R.R.'s

[LiteSleeper]

Is anybody out there running 1.6 R.R.'s on a stock roller camed L98?

 

[ARODFX]

I just won some on ebay and will be putting them on soon. Too cold in N.H. and I don't have a garage yet. I hear that they are good for some extra horsepower. Don't know how much but will soon find out!

 

[LiteSleeper]

I just won some on ebay and will be putting them on soon. Too cold in N.H. and I don't have a garage yet. I hear that they are good for some extra horsepower. Don't know how much but will soon find out!

Thanks ARDOFX. Be sure and let me know how it goes

 

[Edmond]

Is anybody out there running 1.6 R.R.'s on a stock roller camed L98?

There are a lot of members here to run it. I believe it could potentially add 10hp or so? But I also believe that it moves that power to the upper band where you may not feel it with the limits of the TPI system. Someone will chip in soon enough.

 

[oldace84]

Will they work on an '84 stocker?

thanks
tony

 

[mr.corvette]

Hello!!
I have 1,6 RR on mine, and it just work nice, not a seat to panty difference, but revs a little better, I have this together with siamesed base and double 3" ext. Works great.

 

[elkabong]

I have a set on my 84 with a ported manifold. Easy install. The only issue is checking the pushrod clearance on the stock heads. They are tight and you may need to open them up a tad. They do make a difference, to what extent I am not sure yet. It will require tuning or you can kick up the fuel pressure a little for some extra go juice. I will be tuning mine with a VAPFR once my diaphram and spring arrive. I also have a Prominator so the tuning will go a lot easier.