Question: 67 Ignition Switch

[GFERN]

I would like to remove my ignition switch because I can't turn the key to the accessory side of the switch. I know that to remove it you need to put a paper clip or equivalent in the hole and turn the key to the accessory side. Since I can't do that, what are my alternatives? Does this require me to cut off the bezel? Thanks

 

[JohnZ]

Before you do anything drastic, spray some "Lock-Ease" into the key slot and work the key in and out and back and forth to try and free up the tumbler wafers; also try another key if you have one - if it turns to the right, it should turn to the left.