Welcome to the Corvette Forums at the Corvette Action Center!

79 speaker harness

  • Thread starter Thread starter ronlea1006
  • Start date Start date
R

ronlea1006

Guest
Bought new speakers from Eckler's came with a red and black wire harnes does not match up with my factory harness of grey and tan wire on one side and light blue and dark blue on other side . Does any one know which is neg. and pos. and does it matter thanks
 
From the wiring diagram for my 78:

Lt Green - Right Front - Feed from Radio
Dk Green - Right Front - Speaker Return

Tan - Left Front - Feed from Radio
Gray - Left Front - Speaker Return

Lt Blue - Right Rear - Speaker Return
Dk Blue - Right Rear - Feed from Radio

Yellow - Left Rear - Speaker Return
Brown - Left Rear - Feed from Radio

What matters is that your new speakers need to be phase matched by connecting them all the same way. Suggest that each speaker's positive be connected to your Vette's "Feed from Radio" wires, and the negative leads connected to the "Speaker Return" wires.

Hope this helps.
Jerry
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom