Welcome to the Corvette Forums at the Corvette Action Center!

Question: 90 plenum install

GWinter

Well-known member
Joined
Oct 2, 2005
Messages
88
Location
NW Iowa
Corvette
1990 conv. 6sp
I need to replace the EGR valve on my 90. I have had the plenum off before and found it really difficult to keep the gaskets in place because of the tight fit. Seems as though the runners are warp a little. Did I do something wrong or is there a trick to getting it in between the runners. Thank you for your time .
 
I glue one side of the gasket ( to the plenum and bottom of runners ) and grease the other side. That holds them in place while you move parts around and if you are lucky you can easily separate the runners and plenum at a later date without destroying the gaskets
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom