When I bought my vet the ASR light stayed on at all times. This morning poking around under the hood I found the cooling fans were HOTWIRED. I traced the wire back to the fuse box and it was hooked to ENG1. Pulled the fuse and it was blown. Unhooked the HOTWIRE and replaced ENG1 fuse. Started the motor and watched the fans and temp gauge. Gauge got to the center tick mark and no fans operating. Worried I was pressing my luck with an over heating problem, I turned on the AC and the secondary fan came on like it is suppose to. Is there any way to test the primary relay to see if it is bad or should I just purchase a new one and give it a try?
Thanks for any help
Tim
Thanks for any help
Tim