Carbon Fiber BRAKE DUCT*cooling*

[GO_VETTE]

Anyone knows pf a place that sells carbon fiber brake ducts w/ cooling hose made for c4's? FUNTIONAL not cOsmEtic!
if not, then I guess I will have to fabricate my own.:ugh

 

[So Bay Vetter]

Corvette Central; search brake ducts (not carbon fiber but you'll scrape the crap out of it anyway)

View attachment 19156

 

[GO_VETTE]

Thanks, I am aware of these.
I am not happy w/ setup.
I think I will have to create 2 carbon fiber squared boxes. insert screen covers on to prevent debris build up.
drilling 2 holes thru the dust shield.
a 3" hose ducting connected from the carbon boxes thru dust shield and centered at the rotors.

 

[CorvetteArchives]

I've seen some on ebay at time for race cars (sprint/midget) that might work.

 

[GO_VETTE]

Corvette Archive, you are a very smart guy. you know the faces and places.
hey bye the way thanks for the seatbely recall info.

you know, i took apart the lower wheel housing for cleaning.I was just studying my options for install.

I am going to mount 2 small squared CF boxed below the bumper (L/R) sides next to the air charge opening on lower part of front bumper.
I am going to drill 3" holes from the wheel housing, route the duct thru
I just need to figure a few things.

when wheel turning, rubber not to touch the hose.

I may probably install a bracket on upper control arm, and place hose in there.
and cut out a hole in dust sheild and clamp it it tight.