tcxd40
Well-known member
- Joined
- Mar 7, 2007
- Messages
- 387
- Location
- Pittsburgh
- Corvette
- (2) Black '93s, purple '81, '69 vintage racer
Hi folks,
I have read most of the posts from the past on the body mount issues. Seems like everyone who has tackled this project has had alot of broken bolts. However I did not see or missed the "bolt issue". Are bolt kits required because they seem to brake or is there some other reason? Length, strength?
I purchased the urethane mounts by themselves. The original bolts seem to be fine, all came out with no problems. Did not have to use any penetrating oil. I have seen bolts available with the urethane mounts. Are they required? Proceed with using the old ones?
Thanks tcxd40
I have read most of the posts from the past on the body mount issues. Seems like everyone who has tackled this project has had alot of broken bolts. However I did not see or missed the "bolt issue". Are bolt kits required because they seem to brake or is there some other reason? Length, strength?
I purchased the urethane mounts by themselves. The original bolts seem to be fine, all came out with no problems. Did not have to use any penetrating oil. I have seen bolts available with the urethane mounts. Are they required? Proceed with using the old ones?
Thanks tcxd40