Circuit Breaker

[BruceJ]

Does anybody know if there is a circuit breaker for the seat control module. This is for a 1998 C5 corvett, this is really driving me up a wall. When I check the codes the SCM comes up NO Communactions. Please somebody tell me befor I go completey crazy.

Thank You
BruceJ

 

[Rob]

Welcome to the Corvette Action Center. I've moved your thread into the C5 Tech forum for greater exposure.

 

[hoosierdaddy]

Welcome to Corvette Action Center

Hey BruceJ I do not know about what your asking and maybe you've already checked both fuse boxes, one is on the RH side (Passenger Side) @ the end of where you would have your feet there is a panel (carpeted compartment cover) with two latches that needs to be pulled out to remove, once you do that you will see electronics area, ECM and fuse panel. Then the one that is located on the RH sided passenger side as well that sets out in the engine compartment with one knob in the middle and says I think fuse box or something to that effect. Now if there is any more than those two it is above my pay grade as they say

But before I forget

Hope this helped some but surely you have found at least the one in the engine compartment good luck. I see Rob moved this to get more exposure and that will help but you may want to introduce yourself in the NEW MEMBERS section as well when you get time so other can welcome aboard as well.

-Bill

 

[dadaroo]

Yes there are 2 circuit breakers. The driver side is #35 in the I/P fuse box and #36 is for the passenger side.

Besides no comm on the SCM are you having any issues with the doors?

What is your actual problem besides the no comm code.

 

[bill81vette]

Welcome to the CAC!!!!
Enjoy!!!!!

 

[BruceJ]

circuit Breaker

Yes there are 2 circuit breakers. The driver side is #35 in the I/P fuse box and #36 is for the passenger side.

Besides no comm on the SCM are you having any issues with the doors?

What is your actual problem besides the no comm code.

The problem that i am having is the easy entry is not working along with the mirrors. all the other feathers on the drivers seat are working. I tried reprograming the FOB but that did nothing. I checked all the fuses and circuit breakers. I get the error no communications which I thought meant no power .I am at a complete lose since it had worked then stopped.

Thank You for your help
BruceJ

 

[dadaroo]

So all other Memory features work except the mirrors and easy exit? No seat memory issues?

No comm can be no power to the module, problem internally, or a bad serial bus wire/circuit.

Disconnect the battery for a few minutes and see if you can reboot the electronics.