LannyL81
Well-known member
- Joined
- Jul 20, 2002
- Messages
- 653
- Location
- Oro Valley, AZ USA
- Corvette
- 81 White/Cinnabar, 96 CE LT4 sil/blk
Does anyone know what the resistance range is supposed to be for the coolant and oil temperature sensors?
I would like to check the calibration of the gauges....although calibration is a bit too "strong" of a term.
My coolant gauge reads just under the thick 200°F mark, right where it should for the installed thermostat.
But the oil temperature gauge seems to be quite low. I added this feature to my '81 a long time ago, so the parts were never "calibrated" at the factory...so I probably have the incorrect shunt resistor on the gauge. This is what I want to check-out as well as the coolant gauge scale.
Anyone??
I would like to check the calibration of the gauges....although calibration is a bit too "strong" of a term.
My coolant gauge reads just under the thick 200°F mark, right where it should for the installed thermostat.
But the oil temperature gauge seems to be quite low. I added this feature to my '81 a long time ago, so the parts were never "calibrated" at the factory...so I probably have the incorrect shunt resistor on the gauge. This is what I want to check-out as well as the coolant gauge scale.
Anyone??