Welcome to the Corvette Forums at the Corvette Action Center!

Correct Fan

  • Thread starter Thread starter Bad65
  • Start date Start date
B

Bad65

Guest
What is the correct fan size in inches for the 65 vette? Have any of you gone with an aftermarket fan and have recommendations? I have the 327/350 without AC. My concern is the fan that is on my vette is within 1/8 to 1/4 inch of hitting the tubbing that sits right next to it (connects to the radiator). It has hit it before because I see the indentions into the tubbing. I think that I have the wrong fan size. Thanks!
 
I measured the fan that is on my vett it's 18 inches with 5 blades. I do not have AC. I am wanting to switch it out for a 17 inch fan. Thanks for the post.
 
WayneC said:
17 and 1/8 inches, 5-blade. A/C cars use 18 inch 7-blade fans.
some would say that although the AIM calls out for the 7-blade fan for a/c C2s in later years, it was never put on in production . . . .
 
Ordered the 17 inch fan and the new lower radiator hose. After todays heat the 18 inch fan started hitting the lower radiator hose and rubbing it bad. Can't drive it until I put these new parts on! Thanks for the help. Anyone need a 18 inch fan blade....
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom