R
ROCKO
Guest
Has anybody replaced the timer for the interior lights. Mine is erractic. My tech book from the factory shows the location but no step by step. Help!!!!!!!!!!!!!
Rocko
Rocko
c4c5specialist
Technical Advisor
HI there,
It is really just a plug and play type set up.
It is taped up to the wiring harness, under the passenger side instrument hush panel.
Usually, it is tough to get to. And its around the ecm harness, and you might be able to just slide your hand in between the wiring harness for the ECM, and the lower heating duct.
Besttoyou, c4c5
It is really just a plug and play type set up.
It is taped up to the wiring harness, under the passenger side instrument hush panel.
Usually, it is tough to get to. And its around the ecm harness, and you might be able to just slide your hand in between the wiring harness for the ECM, and the lower heating duct.
Besttoyou, c4c5
vigman
Motor head!!!!
- Joined
- Feb 13, 2001
- Messages
- 3,471
- Location
- Valencia, CA,USA
- Corvette
- 88 Convert ( SOLD ) /1973 coupe 4 speed/1964 Vert!
Its a little black plastic box
Has I believe 5 leads going to it.... it's not mounted except with a hunk of masking/cloth tape.
The connector is actually the cricut board.
Mike
Has I believe 5 leads going to it.... it's not mounted except with a hunk of masking/cloth tape.
The connector is actually the cricut board.
Mike
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
