Cruise controll vacuum line

[Peer81]

Hello everybody,

I can't seem to find where to connect the cruise controll vacuum line to the main vacuum line. Is there somebody how can show me were it is connected on there 81?

Greetings Peter

 

[bill81vette]

peter,where the cruise transducer is,
the hose above the 't' is the one that goes to the back of the cruise
servo.
is that what you are looking for?

 

[Peer81]

Thanks for the pictures Bill,

I looked it up and I need the cruise control vacuum line connection with the vacuum source (somewhere close to the intake manifold). So the first pictures almost shows it or at least I can't seem to find it in that picture

Groeten Peter

 

[bill81vette]

I have this one which shows the vacuum solenoid as well as the connection into the intake,between the carb and distributor.
I can look again when I get home to see where it originates from that 't' near the transducer,If you need me to.
check the link below for the pic I wanted to put here


http://www.corvetteactioncenter.com...cuum-headlight-issue-fuel-vapor-question.html

good luck!!

 

[Peer81]

I think I see the problem. My original L81 had a vacuum connection on top of the intake with 3 openings, 1 for the TH350, next for the headlights and the last for the CC. Now I have another one with only 1 opening. The 700R4 doesn't need a vacuum source anymore but then I only have 1 opening short for the CC.

Groeten Peter

 

[bill81vette]

Peter,How did you make out???
I was out in the mid-west for 9 days and didn't have access to a computer!!!!

 

[Peer81]

Well I need a "T-tube connector" to connect the CC vacuum line to the main vacuumline. But the tube connectors I have only have 2 big openings and always one smaller so I need to find a connector with all the 3 tube's the same right size

Groeten Peter