Edelbrock/Holley Vacuum connector

[Scott81]

Anyone that runs a Holley carb on an Edelbrock manifold and has trouble getting a decent vacuum connector under the carb I may have found a solution. I bought one from a place called Mo-Speed. Right now I'm using the edelbrock low profile vacuum connector and I had to grind off quite a bit of it for it to fit, this one looks like it will work nicely and has 3 connectors for lines rather than just one. Friendly service and the part was at my house in 2 days! Their web site isn't finished but there is contact info there. Here's pics of the part, once I install it I'll let you know how it fits.

http://www.c3sharktank.com/stuff/vac1.jpg

http://www.c3sharktank.com/stuff/vac2.jpg

 

[Tom B Hargrove]

Great idea. I've had to modify them to fit several times. I will be watching for their page. Thank's for the tip.

Tom

 

[Scott81]

Ok, everything installed and it took about 10 minutes, nice and easy! This piece fits much better than the Edelbrock piece, and has 3 ports rather than just one.

http://www.c3sharktank.com/tech2/vacfitting/index.html

 

[vmrod]

awesome!!!! For years, I've had nothing but vaccuum problems, cuz I have all my vaccuum lines tied into the carb. (I'm running a holley on an Edelbrock intake).

Next week, I'll purchase this fitting and see how things go.

-Vic

 

[vmrod]

Scott81,

What vaccuum lines are installed where on your car? I also have an Edelbrock/Holley combo. My carb. vaccuum is right above where the manifold vaccuum is located.

Do I only route the distributor advance to the carb. vaccuum port?

What about the vaccuum line for the transmission?

Where does your PCV hose go?

-Vic