Stephen Ridner
Active member
Dash Harness, ECM and ECM Harness, Front Lamp Harness, Engine Harness. Taken from a 82 Collector with 9,000 miles all are in great condition. 350.00 + shipping.
F.S. Wiring Harnesses
- Thread starter Stephen Ridner
- Start date
- Moderator
- #2
KANE
Moderator
- Joined
- Mar 2, 2002
- Messages
- 3,244
- Location
- KY
- Corvette
- Dark Blue 1982 Trans Am(s): Polo Green 1995 MN6
Since you have taken the time to strip out the harness...
How integrated into the vehicle's main harness is the CFI? Is it kinda like an add-on (stand alone) or is it fully integrated?
I was thinking of using an 80-82 Vette as the basis for a project... but which model specifically will be narrowed down on my list by degree of BS associated with removing the harness (L83 or L81). I don't want to do a lot of hacking with a wiring harness in order to separate the CFI from the rest of the car. I don't want to push the CFI harness out of the way either. I'd simply rather use an 80 or 81.
How integrated into the vehicle's main harness is the CFI? Is it kinda like an add-on (stand alone) or is it fully integrated?
I was thinking of using an 80-82 Vette as the basis for a project... but which model specifically will be narrowed down on my list by degree of BS associated with removing the harness (L83 or L81). I don't want to do a lot of hacking with a wiring harness in order to separate the CFI from the rest of the car. I don't want to push the CFI harness out of the way either. I'd simply rather use an 80 or 81.
- Thread starter
- #3
Stephen Ridner
Active member
The CFI harness is a seperate harness and is only connected to the man dash harness for oil pressure and oil temp and speed sensor.
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
