Welcome to the Corvette Forums at the Corvette Action Center!

For Sale Pro Built 548 Big Block. Dynoed at 778 HP. NA

63mako

Active member
Joined
Sep 7, 2006
Messages
29
Location
millington IL
Corvette
1963 Custom SWC
Here is the info. This IS a street engine.:D This has Dyno time only on it. Freshly Pro Built, Dyno Tuned 548 Big Block W/ Bowtie Standard deck Race block. 4.530 bore.(can go to 4.600) 4 bolt mains, Steel splayed caps, Fully ARP studded. O-ringed, Copper head gaskets. Set up to run a 300 shot of nitrous. Kieth Wilson ported 454R intake, port matched to heads, Chuck Nutten 1150 dominator. MSD HEI, Dart 308 Fully race ported heads. Crane Roller rockers, SS valves, Comp Cams Solid roller billet cam .722 lift, 276 int duration, .722 lift, 284 Ex dur, 110 LSA 108 ICL. Speed pro forged 10.25 to 1 pistons, Lunati Pro Mod Rods, BRC 4340 forged nitrated Crank, High volume oil pump, Moroso valve covers and 7 Qt oil pan. SFI Balancer, Steel flexplate, Dyno runs on 91 octane gas 778 HP @ 7000 rpm, 680 ft lbs @ 5000. Will post dyno sheets as soon as I can scan them. over 700 HP from 5500 to end of run @ 7200. Over 600 ft ls from 4300 to 6700. He built this to put in a 65 chevelle street rod and sold the car as a roller. Just imagine this with a 300 shot on it! Please E-mail if interested.
7-3-2007-3.jpg

7-3-2007-4.jpg
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom