topless82vette
Well-known member
- Joined
- Nov 1, 2001
- Messages
- 910
- Location
- southern california
- Corvette
- 1982 convertible (not factory) stock 350cfi auto
I have had this harness for a few years and gave up on using it in my vette. It came from a 1991 camaro Z-28 with a automatic. It is a speed density harness in very nice shape but has 3 cuts that will be easy to fix, I recall the cuts to be the ignition coil feed and tach feed and one other but have to look at it again.
The harness has the positive battery cable, VSS sensor, all fan wiring intact for dual fans.
125.00 + shipping
I also have a partially polished stock TPI system for extra cost but it needs alot of finishing work. about 95% of all rough casting has been sanded down. I have the base manifold, plenum, runners sanded down but they need final sanding. this tpi system came from a 86 f-body so you would need a cold start plug kit to use it with the 91 harness.
250.00
The harness has the positive battery cable, VSS sensor, all fan wiring intact for dual fans.
125.00 + shipping
I also have a partially polished stock TPI system for extra cost but it needs alot of finishing work. about 95% of all rough casting has been sanded down. I have the base manifold, plenum, runners sanded down but they need final sanding. this tpi system came from a 86 f-body so you would need a cold start plug kit to use it with the 91 harness.
250.00
