Welcome to the Corvette Forums at the Corvette Action Center!

Frame spec drawings

Fuelie

Well-known member
Joined
Feb 20, 2003
Messages
326
Location
Ontario
Corvette
'65 Fuelie Coupe, '78 L48 Cpe
I am looking for copies of the factory frame spec drawings for '68-'72, '73, '74, '75-'77 and '78-'79 vettes.
They used to be in the front section of the Corvette Service Manuals.

I have the '56-'62, '63-'67 and the '80-'82 vette drawings on my website in .pdf form if anyone needs to print them. They are in the workshop section of the site www.hayco.ca/work.htm

If anyone has the drawings that I am looking for, could you send me an e-mail with an attched copy? That would be very much appreciated.

Take care,
Brian
 
My '79 factory service manual shows exactly the same frame dimensions shown on your site for an '81.
 
1979toy said:
My '79 factory service manual shows exactly the same frame dimensions shown on your site for an '81.

Hi Steve,

Thanks for your response. I have also checked an '82 against the '81 and they are identical too.

I think that it is safe to assume that the '78 to '82 frame dimensions are all the same.

Take care,
Brian
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom