Welcome to the Corvette Forums at the Corvette Action Center!

FS: DIACOM PLUS KIT

JAKE

Well-known member
Joined
Nov 10, 2006
Messages
313
Location
KEMPNER, TX
Corvette
1996 388 LT1
Here's what I have for sale:

1. Software floppy disk with Diacom Plus software

2. Printer connecting cord. One end to printer port on laptop or PC and other end connects to one of three DIACOM ALDL adapters.

3. RINDA ALDL connector and cord, red in color, narrower in width than the other two; has no part number or sticker on it.

4. RINDA ALDL connector and cord, has a sticker with "Part # 91006 GM Special TPI"

5. RINDA ALDL connector and cord, has a sticker with "Part # 91007 GM 1982 and Up"

6. Cigarette lighter plug-in and cord.

As you may know, DIACOM shows REAL-time data with the engine running and has logging capablilty for WOT blasts. Displays just about all the data you'd need to know: airflow, injector pulse width, loop status, RPM, IAC counts, TPS voltage, EGR activity, Intergrator and BLM values, knock sensor activity, ignition timing, air temperatures, on and on and on.

Please don't ask me to do shipping quotes. These parts are very light in weight, so figure around $10 to the US.

I do PAYPAL.

Jake​
 
PM sent
 
Oops, forgot to list the price: $150.00 plus shipping.

Jake
 
Last night I found the Owner's Manual, so that'll be included too.

The Manual says Diacom will work with GM OLDS, PONTIAC, BUICK, and CHEVY engines from 1981 thru 1995 - even the LT5 and LT1 engines. No diesels though.

Jake
 
Last night I found the Owner's Manual, so that'll be included too.

The Manual says Diacom will work with GM OLDS, PONTIAC, BUICK, and CHEVY engines from 1981 thru 1995 - even the LT5 and LT1 engines. No diesels though.

Jake


I see you have a 96....is the reason you are selling it is because it wont work on your 96?

I have a 96 LT1 is the reason I am asking.



Thanks,
Jim
 
I see you have a 96....is the reason you are selling it is because it wont work on your 96?

I have a 96 LT1 is the reason I am asking.



Thanks,
Jim


Right, 96 is OBD II. It'll work through 1995, including LT1, but not 96, at least thE 96 isn't listed in the back of the User's Manual as being supported.


Jake
 
SOLD and SHIPPED! Thanks to all.

Jake
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom