Help! Good Fuse! / No Horn!!?

[Donne Trav]

No HORN a couple months ago. Replaced bad FUSE, horn was OK. Now
suddenly, the horn stopped blowing, but the FUSE looks A-OK.

Someone please explain, WHATS UP!?

 

[TedC]

I would retest the fuse with a VOM to verify. Then check for voltage at the horns when you depress the horn switch. If fuse is OK and no power at the horns, then it is a defective horn relay, open common wire feed to both horns, or problem with horn switch on steering wheel. Running tests at the horn relay would really help isolate this, but that may be easier said than done due to location.