Welcome to the Corvette Forums at the Corvette Action Center!

Installing HUD on a base C6

Joined
Jan 12, 2004
Messages
424
Location
Lakeside in Monmouth, Maine
Corvette
75 Stroker 4spd Frame Off, 05 Cpe 6spd
That's weird calling a C6 a "base" C6 isn't it!

I found a C6 Conv, but with the base options....just has 6 speed manual and Z51. If it only had HUD. Has anybody looked into doing that on a C6. I've seen articles on the C5.

If someone has, please let me know and if possible, approximate cost.

Thanks for helping,

Chuck
 
That's weird calling a C6 a "base" C6 isn't it!

I found a C6 Conv, but with the base options....just has 6 speed manual and Z51. If it only had HUD. Has anybody looked into doing that on a C6. I've seen articles on the C5.

If someone has, please let me know and if possible, approximate cost.

Thanks for helping,

Chuck
it has been done on C-5s. check some of the corvette webs you will need to find a crashed C-6 to get all the stuff
 
I'll check with the local Chevy dealer parts guy I know. He'll look up the stock parts and compare the difference. He's an ace at it. If I get the car and do the HUD install, I'll do a follow up for whomever needs to do this.

Chuck M
 
That's weird calling a C6 a "base" C6 isn't it!

I found a C6 Conv, but with the base options....just has 6 speed manual and Z51. If it only had HUD. Has anybody looked into doing that on a C6.
Ive read that its very difficult in a C6. It might include changing the windshield.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom