Crispyc21
Well-known member
I’ve known about some of the issues for some time and I’m waiting for warmer weather to do some further investigation. Here are my problems in order of importance to me.
Car: 97, 66k miles, auto
1. No codes for this one but I still need to know what is wrong. For some reason my rear left tire is making a squeaking\rubbing sound. It’s hard to describe. It doesn’t happen all the time but it is happening more and more often. I first thought it was a warped rotor which was rubbing against the break pad but I don’t get any vibration when putting on the breaks nor does the sound stop. I’ve also turned the car left and right when the wheel was squeaking and it stopped when I turned it in one direction (I forgot which direction).
After doing some research it might be the bearing. Is there any way to test if that’s it? Pricing? Let me know what you think.
- I really don’t want to drive the car until I fix this problem so any help is appreciated.
2. While driving to work my check engine light came one (light number 1). I checked the codes and saw 10-PCM: P1416H code is "Secondary Air Injection (AIR) System Bank 2." I cleared this code and it has not come back yet. But it’s only been a day.
- Is there anything I can do to help it not come back, and if it does, how do I fix it?
3. Every now and then I will get the Service ABS and Service Traction Control lights (lights two and three). It does not come on all the time but will when I hit some small bumps. For some reason it’s fine with the big ones. I know it’s not the wheel speed because there is no way the wheel is hopping. The other day I went over a rumble strip in the road and it set the codes. (28-TCS: C1226 - LF Excessive Wheel Speed Variation)
- What might I need to do fix this issue? Any tests?
Other codes:
PCM: P1571, that code is "Traction Control Torque Request Circuit". – I heard this is normal for 97s
80-Radio: U1016 Loss of Communications with PCM – The radio works fine but I can’t get rid of the code. It just comes back after clearing it.
A6-SCM: B2606 - Seat Rear Vertical Position Sensor Failure – Not sure about this one but that might be why my memory sometimes puts my seat in the wrong spot.
Car: 97, 66k miles, auto
1. No codes for this one but I still need to know what is wrong. For some reason my rear left tire is making a squeaking\rubbing sound. It’s hard to describe. It doesn’t happen all the time but it is happening more and more often. I first thought it was a warped rotor which was rubbing against the break pad but I don’t get any vibration when putting on the breaks nor does the sound stop. I’ve also turned the car left and right when the wheel was squeaking and it stopped when I turned it in one direction (I forgot which direction).
After doing some research it might be the bearing. Is there any way to test if that’s it? Pricing? Let me know what you think.
- I really don’t want to drive the car until I fix this problem so any help is appreciated.
2. While driving to work my check engine light came one (light number 1). I checked the codes and saw 10-PCM: P1416H code is "Secondary Air Injection (AIR) System Bank 2." I cleared this code and it has not come back yet. But it’s only been a day.
- Is there anything I can do to help it not come back, and if it does, how do I fix it?
3. Every now and then I will get the Service ABS and Service Traction Control lights (lights two and three). It does not come on all the time but will when I hit some small bumps. For some reason it’s fine with the big ones. I know it’s not the wheel speed because there is no way the wheel is hopping. The other day I went over a rumble strip in the road and it set the codes. (28-TCS: C1226 - LF Excessive Wheel Speed Variation)
- What might I need to do fix this issue? Any tests?
Other codes:
PCM: P1571, that code is "Traction Control Torque Request Circuit". – I heard this is normal for 97s
80-Radio: U1016 Loss of Communications with PCM – The radio works fine but I can’t get rid of the code. It just comes back after clearing it.
A6-SCM: B2606 - Seat Rear Vertical Position Sensor Failure – Not sure about this one but that might be why my memory sometimes puts my seat in the wrong spot.