Long tube headers ?

[aboatguy]

Merl has a GP going on.

Mike

 

[Vettefan87]

Go with TPIS headers, they are very good quality and very easy to install, but get the ceramic coated ones. I have not had to get ceramic boots I am just running the Accel wires I bought from autozone and routed them myself. My car made it all the way down to Cruisefest last year like this and back with no problems. I probably have 6 thousand miles on the headers.

 

[C4CRAZY787]

I've run the EM's for 2yrs, no problems with ground clearance or the wires.

 

[Agent 86]

Thats strange it works for me. Here is a copy of my signature from corvette forum. It is a little outdated I have done some updates since this but it will give you a good idea of what has been done to it.

89Black coupe 6spd FX-3 \ Chrome GS Wheels 315\35\17 G-ForceKD's \ SB-406cid\ Procharger D1-R \ 8 Rib pulleys\ Custom built Spearco intercooler \ Spal Fans \ NOS wet nitrous system controlled by jacobs mastermind controller \ Spearco water/alcohol injection system \ TPIS Mini Ram II \ 58mmTB \ AFR heads \ AFR rev kit \ Manley4340 push rods \
Comp cams custom grind roller \ Comp cam lifters \ Comp cams roller rockers 1.6 ratio \ Ross custom pistons 4340 pins \Speed pro rings \ 6 inch eagle 4340 3d rods \ eagle 4340 crank \ fluid balancer \ Cloyes true roller timing chain \ Melling high output oil pump \ 10 qt. multi trap door pan \ large oil cooler \ MSD-Digital-7 ignition\With MSD pro-power coil \ MSD boost retard \ Msd super conductor wires \ Accel DFI Gen.7 W/wide band \ 83lbs injectors \ Centerforce clutch & flywheel \ TPIS jet hot coated headers \ 13 inch rotors C5 calipers w hawk pads \ Air dam with air ducts to brakes \ Triple pillar pod with Autometer gauges \ Air-Fuel \Boost \Fuel Pressure \ lowering kit \Escort radar detector \RM radar jammer. http://www.VILLAGEPHOTOS.COM/pubgallery.asp?sellected=79369 The difference between men & boy's is the speed of their toy's
IF IT'S NOT BLOWIN THEN IT SUCKS : 35340[/url]

Sounds like something i could use:BOW :BOW