Welcome to the Corvette Forums at the Corvette Action Center!

LT1 cranks but doesn't start

W

Wheelie

Guest
Here's one for the real techs out there.

'92 LT1 cranks but doesn't start.
I've got Alldata and a Matco 4000 scan tool.
Fuel delivery is verified good.
Car has no spark.
I pulled a code 42 from the ECM. After testing I replaced the ignition module (coil driver). Now I still have a no start condition with a code 41. At this point I don't really trust that I have a bad ignition module as the new test procedure shows. It's possible that I got a bad part, but I strive to diagnose a problem not just be a parts swapper.
One test procedure asks 'is there RPM indicated during cranking?'. The scan tool with key on indicates 318 rpm, this value does not change cranking or not. Lo Resolution signal is 96ms and High Resolution signal counts up during cranking from 0 at a 1/2 to 3/4 per second rate.
Bad Opti-spark? Bad PCM? Ignition module?

HELP!!!!!!

Steve
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom