Need Help

[barrier5]

When you're looking at the module with the pins at the 6 oclock position is that the pink and black wire? The replacement modules dont have any markings on them to tell which is terminal A B C D or E.

 

[Ken]

The wire colors for my '87 are:

• "A" = blank
  [*] "B" = --- 439 PNK/BLK --- (IP Connection) --- (ECM/IGN) --- Ignition
  [*] "B" = --- ^(IP Connection) --- 439 PNK/BLK --- A6 --- (ECM) Ignition
• "C" = 485 BLK --- B7 --- (ECM) ESC Signal
• "D" = 486 BRN --- Engine Ground
• "E" = 496 WHT --- Knock Sensor

Hope it helps you.

 

[barrier5]

OK, Thanks gents, thats what I needed to know,the wiring is backward not to mention a little sideways from an 82.An 82 has a plug marked A thru K,with A being a shield,B is the blue,F is pink and black,J is black and K is the brown ground wire.The rest are not used. So now I shouldn"t do in my ECM (knock on wood) when I hook up this little mess of mine.

 

[barrier5]

Forgot to say,shouldn't need that pic now.Thanks again, Rene'

 

[Ken]

:cool

 

[vigman]

Just BE careful

Mike