Need some help!

[05DaytonaRam]

So I've decided just to get my car up and running and make sure all is still good.

I've been trying to figure out all I need to get it up and running. So my question is this. What all would I need to just get this car up and running electrical wise in the engine bay?

 

[bill81vette]

Brian,What is there now???
do you need a wiring harness or just plugs,wires,and a cap and rotor???

 

[05DaytonaRam]

All thats there now is the block. The heads are off, manifold, and carb. Rad is out. All the wire are gone.

Bout everything needs replacing.

 

[Vettehead Mikey]

A big bucket of money will help.

 

[6880 Mike]

Purchase the assembly instruction manual (AIM) for your model year. The AIM will show you everything which is missing on your car, the original GM part names and numbers for everything you are going to need, and will have diagrams of how the missing parts were installed on the assembly line.

Good luck. If everything but the engine is missing, you've got a big job ahead of you.

 

[05DaytonaRam]

In the engine bay the only thing there is the engine at the moment. The rest of the car is fine. The steering box and suspechon is all there. Only what had damage came out.