D
devilfish
Guest
Working on a good setup for one of the guys in our corvette club in sweden ( www.vetteforum.org ). Could you guys help me with this cam question?
The setup:
With the lt1intake conversion.
Ported alu corvette 113 heads
headers
6 spd manual tranny
WHats your feedback on this cams Im looking at?
CC 269HR-12 218/224 .495 .503 ( with 1,5rr )112
CC 276HR-14 220/230 .510 .510 ( with 1,5rr ) 114
LT4 hot cam 218/228 .525"/.525" 112 ( with 1,6rr )
which cam would work "best"
I rather whant a littel more midrange torque then high RPM hp in this car.
Give me some tips.
It must pass the "sniffer" emession tests.
Thanks for your time...
( the CC cams are cheapes in Sweden )
I can also have a custom cam made pretty cheap.
Devil..
The setup:
With the lt1intake conversion.
Ported alu corvette 113 heads
headers
6 spd manual tranny
WHats your feedback on this cams Im looking at?
CC 269HR-12 218/224 .495 .503 ( with 1,5rr )112
CC 276HR-14 220/230 .510 .510 ( with 1,5rr ) 114
LT4 hot cam 218/228 .525"/.525" 112 ( with 1,6rr )
which cam would work "best"
I rather whant a littel more midrange torque then high RPM hp in this car.
Give me some tips.
It must pass the "sniffer" emession tests.
Thanks for your time...
( the CC cams are cheapes in Sweden )
I can also have a custom cam made pretty cheap.
Devil..