Power Steering Control Valve

[emf1367]

Well, I searched the archives and couldn't find an answer so here goes.....

I'm rebuilding my steering control valve. I took numerous photos as I disassembled it and now its time to reassemble. Problem is that I don't believe it was assembled correctly by the last person and the kit I bought from Paragon doesn't have instructions.

Does anyone have photos or a diagram that shows the sequence of part assembly?

 

[emf1367]

Power Steering Control Valve Rebuild

Well I hate to say it but I looked a little further after posting my request and found the answer on another forum.

I searched the corvettefaq.com site and found that Jim Shea posted a very detailed and comprehensive list of instructions and illustrations on overhauling the control valve. I recommend it as a "must read" for anyone wanting to tackle this project.

Thanks

 

[GaryS]

Well I hate to say it but I looked a little further after posting my request and found the answer on another forum.

I searched the corvettefaq.com site and found that Jim Shea posted a very detailed and comprehensive list of instructions and illustrations on overhauling the control valve. I recommend it as a "must read" for anyone wanting to tackle this project.

Thanks

You ought to visit the other areas that Jim Shea posted in and copy the stuff for your archives. For instance, rebuilding/repairing your steering column or anything related to it.
Gary