Pucking Froblem solved with car being lean!

[UB2 SLOW]

:bash :bash :bash :duh :duh :duh ad ad ad

All right I finally found the pucking froblem with the car running lean. I did not tighten the bottom left bolt on the TB the last time I took it off. I had it screwed in until it was tight using my hand and I guess I just forgot to finish. One problem down.

 

[Vettelt193]

have you re-tuned the the fuel pressure now? the car should be much easier to tune now that the MAF is sending correct information!

 

[69MyWay]

So what you are trying to say is you really, honestly SCREWED up (or shall I say you just did not screw enough) to the point you were really sucking! (extra air in, that is).


Hey, get your mind out of the gutter! That is a legitimate technical term in this circumstance!

 

[UB2 SLOW]

Yea I reset the fuel pressure back to 47 for now. I am going to go to the Dyno this weekend. I will tune it then.

69myway, I guess I am the typical man! I just cant screw enough!

 

[78SilvAnniv]

But in this case...

I think you ended the screwing prematurely!
h
:L:L:L:L:L

 

[UB2 SLOW]

I think you ended the screwing prematurely!

Yea, but I came back and finished.

 

[Eagle85C4]

Just like a Marine....it may take a while but we always get he job done...

 

[78SilvAnniv]

I was feeling prankish!

Sorry if I offended anyone!
Heidi