Welcome to the Corvette Forums at the Corvette Action Center!

Q jet swap 68 corvette

greggome

Active member
Joined
Jul 25, 2014
Messages
38
Location
florida
Corvette
1968 corvette bronze coupe
I am swapping out my Holley for my 1968 Rochester carb. The holley had a male fuel fitting so I can hook up my rubber fuel line to it. The Q Jet has a threaded female fitting. I am trying to find a threaded male connector that I can screw in to the Q jet fuel inlet so I can attach the rubber fuel hose like I did on the Holley. From what I understand it needs to be an inverted flared fitting with a 20 thread. Anyone know where I can locate the correct part for this? Tried NAPA with no success.
 
I thought that a 3/8 brake line has the same fitting
Just choose your length

Sent from my SM-N920P using Tapatalk
 
A rubber hose of any type between the pump and carb is a fire hazard just waiting it's turn. The correct metal lines are readily available, I'd use those.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom