jbonifas
Well-known member
I ordered a conversion kit from Ecklers. In the kit I received a rebuilt compresser, a drier, an evaporator orifice and oil, seals, fittings, adapters. My quesion is, where do I start? I know my old compresser was bad and there is no freon or pressure in the system. Do I just remove the old compresser, drier and change out seals and fittings? Where does the oil go? and do I need to flush or clean out anything else.
Please help, it is getting hot in Louisiana.
Jeff
Please help, it is getting hot in Louisiana.
Jeff