rag joint

[RRROBB]

I am replacing my rag joint and using a kit. The supplied Pins in the kit are 2 differant sizes. Please look at the attached pictures and you'll see what I mean. Any differance as to which pin goes where??
http://www.zip-products.com/Zip/productr.asp?pf%5Fid=SC%2D377&gift=False&HSLB=False&mscssid=4F7F4ED8C6434345B9F9881F7056A314
http://www.zip-products.com/Zip/productr.asp?pf%5Fid=ZSC%2D524&gift=False&HSLB=False&mscssid=4F7F4ED8C6434345B9F9881F7056A314

 

[GTR1999]

Rob,
If you're using one of those $15 rebuild kits do yourself a big favor and throw it out. They are garbage, use the GM assembled rag joint only as shown in the referenced page.
Gary

 

[JohnZ]

Rob,
If you're using one of those $15 rebuild kits do yourself a big favor and throw it out. They are garbage, use the GM assembled rag joint only as shown in the referenced page.
Gary

I agree - the "repair kit" is junk, has hokey fasteners and secondary safety pins, and your horn won't work (no ground strap in the rubber disc). I can't imagine why they take on the liability of selling this stuff for a primary safety system. Buy the rag joint - steering is no place to save money.