Welcome to the Corvette Forums at the Corvette Action Center!

Rocker trim panel R/I

T

turbo78vair

Guest
How is rocker trim panel removed/installed? I need to remove the trim piece to gain access to panel that is located below the charcoal canister. Two capscrews are behing trim panel, two are behind front wheel.

Thanks
GaryC - '78PC - Indiana
 
:w Gary,

Take a look at the panel... in the groove area you will see 4 (I think) phillips head screws that hold the panel to the car. Run your finger down the groove and you'll feel them. Memory tells me there are 4, but I'm pretty darn old to be going from memory ;)

Bud
 
Bud, thanks for the quick response. Have a great weekend. Saw a couple Vettes out enjoying the day on our morning trip up toward Indy.

GaryC - '78PC
 
Try one of those hammer impacts or you might wind up stripping the screws out
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom